Glue Sticks

Characteristics:

• Thermoplastic Hot Melt adhesive, 100% solids content.
• Excellent adhesion for bonding plastic, metal, ceramics.

Instruction For Use:

1. Operation Temperature：160 ~ 180℃。
2. Application methods: GUN.

Notice:

1. Open time is changeable, depending upon the nature of the substrate, application temperature, thickness of adhesive applied, room temperature and closing pressure.
2. Do not touch the molten adhesive. In case of burns from hot adhesive, immediately flush skin with cold water and cover with a clean dressing, do not remove adhesive. Have burn treated by a physician.
3. All surfaces should be clean and free of loose elements.
4. Do not heat the adhesive over 180℃ in prolonged time to avoid material decomposition and consequent decreased properties.
5. Always keep containers tightly capped when not in use.

Note:

Product color may vary due to different raw material batch. This variation does not impact on properties.

FDA Status:

Product compositions meet FDA Food Grade 21 CFR 175.105 -Adhesives.

Legal Disclaimer:

The information contained in this data sheet was obtained from a variety of sources and is believed to be accurate and current at the stated issue date. National Adhesive Distributors CC and/ or its agents cannot accept liability for the use of information contained in this data sheet or for the use, application or processing of the product described in the data sheet. Users should note the possibility of hazards occurring due to improper uses if the product.

REVISED SEPTEMBER 2019