Brush-on Super Glue

  • BRUSH-ON SUPER GLUE is a really, really, really fast and strong working clear liquid adhesive, that comes in a spill resistant bottle with a brush for easy application.

APPLICATIONS

  • GLUEDEVIL BRUSH-ON SUPER GLUE bonds on a variety of surfaces, such as leather, cork, paper, cardboard, wood, chipboard, fabric, metal, ceramic, rubber and hard plastics, polycarbonate, polystyrene and PVC.
PACK SIZES AVAILABLE GLUEDEVIL PRODUCT DESCRIPTION CODE
8g Blister – 12 Per Box 50-SGLUE6670
15g Blister – 10 Per Box 50-SGLUE6669

Brush-On Super Glue - Information Sheet - GlueDevil
PRODUCT INFORMATION SHEET Brush-on Super Glue

Brush-On Super Glue - Information Sheet - GlueDevil
SAFETY DATA SHEET Brush-on Super Glue

SKU: 50-SGLUE6670 Categories: ,
Technical Data Sheet (TDS)

BRUSH-ON SUPER GLUE is a general industrial grade Cyanoacrylate adhesive with fast setting, and good flow ability. It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber O-rings as well as other rubber and plastics parts.

GLUEDEVIL BRUSH-ON SUPER GLUE is a one-component, solvent-free adhesive manufactured without the use of hydroquinone. It is a moderately flexible medium viscosity cyanoacrylate and does not require the use of a catalyst, heat or clamps. When a thin layer of BRUSH-ON SUPER GLUE applied between two surfaces comes into contact with atmospheric moisture, a rapid polymerization occurs producing the ultimate bond. GLUEDEVIL BRUSH-ON SUPER GLUE is also suitable for false nails, repairing natural nails as well as applying nail decorations.

TYPICAL PROPERTIES OF UNCURED MATERIAL:
Base Ethyl Cyanoacrylate
Colour Transparent, colourless to yellowish liquid
Specific Gravity @ 25°C 1.10
Refractive Index (n D 20) 1.439
Flash Point See MSDS
Vapour Pressure (hPa) < 1
Viscosity (cP), 25°C 80 – 120
Shelf life 12 months
Storage Life Below 5°C 14-16 months
CURING PERFORMANCE:

There are many factors that can influence the rate of cure. These include: the types of substrate used, the condition of the surface to be bonded, the smoothness of the surface, the closeness of the surfaces, the atmospheric conditions etc.

Cure Speed / substrate:

Steel to Steel 20 – 55 seconds
Stainless Steel 30 – 90 seconds
Aluminium 10 – 30 seconds
Zinc plated 40 – 90 seconds
ABS to ABS 15 – 45 seconds
ABS to NBR 5 – 15 seconds
ABS to Wood 5 – 10 seconds
NBR to NBR 5 – 10 seconds
Polycarbonate 20 – 60 seconds

Cure Speed / Bond Gap

GLUEDEVIL cyanoacrylates give best results on close fitting parts, the product should be applied in a very thin line in order to ensure rapid polymerisation and a strong bond. Excessive bond gaps will result in slower cure speeds. Activators may be used to greatly increase cure speeds.

TYPICAL PROPERTIES OF CURED MATERIAL:
Physical Properties
Color Clear
Coefficient of Thermal Expansion (K-1) 100 x 10-6
Coefficient of Thermal Conductivity (W/m.K) 0.10
Softening Point 165°C
Electrical Properties
Volume Resistivity (Ω.cm) 1 x 1016
Surface Resistivity (Ω) 1 x 1016
Dielectric Constant @ 10 kHz 2.75
Dielectric Dissipation Factor @ 10 kHz <0.02
Dielectric Breakdown Strength (kV/mm) 25
ADHESIVE PERFORMANCE:

After 24 hours at 25ºC.

Tensile Strength:
Steel 190 – 210 Kg/ cm2
Stainless Steel 250 – 450 Kg/ cm2
Aluminium 170 – 190 Kg/ cm2
Copper 150 – 170 Kg/ cm2
PVC 40 – 60 Kg/ cm2
ABS 50 – 70 Kg/ cm2
Polycarbonate 80 – 120 Kg/ cm2
Polystyrene 30 – 45 Kg/ cm2
NBR 5 – 9 Kg/ cm2
SBR 5 – 10 Kg/ cm2
DIRECTIONS FOR USE:
  • Ensure surfaces to be joined are clean, dry and grease-free.
  • Apply GlueDevil Super Glue to one surface only.
  • Join surfaces immediately and apply pressure for 30 seconds.
  • Replace cap and store out on sunlight in a refrigerator for maximum product life.
STORAGE AND SHELF LIFE:

GLUEDEVIL BRUSH-ON SUPER GLUE has a shelf life of 12 months (the expiry date is shown on the packaging), when stored at a temperature between 2°C and 8°C in its original unopened packaging. Refrigeration at 5°C gives optimum storage stability. Temperatures less than 2°C can adversely affect product properties. Do not freeze.

Storage: Store in a cool, dry area out of direct sunlight. Keep container tightly closed until ready for use.

Handling: Material removed from containers may be contaminated during use. Do not pour back any product to the original container. Misuse of product will void all warrantees.

CAUTIONS:
  • Contains Cyanoacrylate Adhesive and can bond skin and eyes in seconds.
  • In case of eye contact. Flush with water and seek medical attention.
  • If skin bonding occurs, soak in warm soapy water or acetone.
  • Keep out of reach of children.
  • Contact through clothing may cause exothermic reaction and burning (See MSDS).
  • Store in a cool, dry place at 20-25°C (68-77oF). For long-term storage, refrigeration (2oC or 35oF) is recommended.
PACKAGING:

            8g brush-on blister pack

Disclaimer: The data contained herein are furnished for informational purposes only and are believed to be reliable. However, National Adhesive Distributors CC does not assume responsibility for any results obtained by persons over whose methods National Adhesive Distributors CC has no control. It is the user’s responsibility to determine the suitability of National Adhesive Distributors CC products or any production methods mentioned herein for a particular purpose, and to adopt such precautions as may be advisable for the protection of property and persons against any hazards that may be involved in the handling and use of any National Adhesive Distributors CC products. National Adhesive Distributors CC specifically disclaims all warranties express or implied, including warranties of saleability and suitability for a particular purpose arising from sale or use of National Adhesive Distributors CC products. National Adhesive Distributors CC further disclaims any liability for consequential or incremental damages of any kind including lost profits.

Revised March 2021