|PACK SIZES AVAILABLE||GlueDevil PRODUCT DESCRIPTION CODE|
|70ml Blister Pack – 12 Per Box||50-SILICONE0317|
|70ml Tube Boxed – 24 Per Box||50-GM0249|
GLUEDEVIL RED GASKET MAKER is a fantastic RTV silicone rubber sealant, which can be used to replace felt, rubber, cork, paper and asbestos gaskets. Makes instant gaskets on valve covers, water pumps, oil pans, rear-end covers, thermostats, outlets, timing gear covers and whatever else needs a durable, watertight, leak-proof seal. It’s acetoxy-curing, permanently flexible and can withstand low and high temperatures ranging from -60°C to +300°C.
Elastic one-component silicone sealant
Acetoxy-curing system. Reacts with air humidity at room temperature
Sealing of joints on heating flues, furnaces, reactors, plant pipes, housing gaskets, form-in-place gaskets, chimney construction, heaters and installation of ovens.
Red gasket maker silicone is distinguished by its extremely good heat resistance and non-shrinking characteristic.
Shore A (DIN 53 505) 33
Elasticity modulus at 100% 0.7N.mm (DIN 53 504)
Tensile strength 2.6N.mm (DIN 53 504)
Elongation at break 450% (DIN 53 504)
Maximum total deformation 20%
Heat resistance: Constant Load up to +250°C
Short Term up to +300°C
Skin formation 10 Min
Full hardening 2mm per day
The surfaces for bonding must be dry, clean and free of loose particles.
GLUEDEVIL RED GASKET MAKER has a shelf life of 12 months (the expiry date is shown on the packaging), when stored at a temperature between 0˚C to 25°C in its original unopened packaging.
Keep out of reach of children.
Avoid contact with eyes and skin.
Curing rate will decrease in areas that aren’t properly ventilated or in low temperatures.
For more information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing, physical, ecological, and toxicological and other safety related data.