Contact Adhesive

CONTACT ADHESIVE is a general-purpose adhesive which offers superior bond strength without requiring clamping or sustained pressure. GlueDevil CONTACT ADHESIVE is water and heat resistant (up to 80°C) and is easily brushable.

APPLICATIONS

GLUEDEVIL CONTACT ADHESIVE is perfect for bonding rubber, leather, carpet tiles, resin laminates, wood, hardboard, metal, canvas, linoleum, felt, cork, ceramics etc. Full strength is obtained after 24 hours. Coverage = 2 to 3m2 per litre, depending on the substrate

PACK SIZES AVAILABLE	GLUEDEVIL PRODUCT DESCRIPTION CODE
50ml Tube – 24 Per Box	50-CONTAD0015
100ml Tube – 18 Per Box	50-CONTAD8090
250ml Tin – 24 Per Box	50-CONTAD005
500ml Tin – 12 Per Box	50-CONTAD0007
1LT Tin – 8 Per Box	50-CONTAD0009
2LT Tin – 8 Per Box	50-CONTAD0013
5LT Tin – 4 Per Box	50-CONTAD0011

PRODUCT INFORMATION SHEET Contact Adhesive

Categories: Adhesives, Contact Adhesive

Technical Data Sheet (TDS)

PRODUCT DATA SHEET: CONTACT ADHESIVE
COMMON NAME:	Contact Adhesive
MANUFACTURER:	National Adhesive Distributors cc
	Tel: (031) 464-0273 Durban
	Tel: (011) 021-4177 Johannesburg Tel: (021) 801-4258 Cape Town
SYNONYM:	Contact Adhesive. Yellow barge.
TRADE NAME:	GD 1000 Contact.
MATERIAL USES:	Bonding various materials like leather, wood, board, rubber etc.
COMPOSITION:	Solution of polychloroprene and resins in hydrocarbon solvents.
APPEARANCE:	Viscous yellow liquid.
DENSITY:	Approx. 0.840 g/cm³
VISCOSITY:	Approx. 2500 cps

APPLICATIONS:

This product is recommended for general bonding of various substrates such as board, Melamine, laminates, wood, cloth, leather, etc. It is recommended that testing is done prior to production to establish suitability of the product.

DIRECTIONS FOR USE:

Clean both surfaces by wiping with a suitable solvent or by roughing. Apply a single coat of adhesive to both surfaces and allow to tack dry (approximately 10 to 20 minutes). Press together firmly to obtain bond. The higher the pressure applied the better the bond strength. Allow 24 hours for full bond strength to develop.

HAZARDS IDENTIFICATION:

Extremely flammable liquid and vapour. May cause flash fire. May cause eye, skin irritation, may be harmful if absorbed through skin. Risk of cancer depending on duration and level of exposure.

ROUTE OF ENTRY:

Eye contact, Inhalation, Ingestion.

POTENTIAL ACUTE HEALTH EFFECTS:

EYES:		Hazardous-Irritant.
SKIN:		Hazardous-Irritant. Skin inflammation is characterized by itching, scaling, or reddening.
INHALATION:		Extremely hazardous if inhaled (lung irritant) Over exposure can be fatal.
INGESTION:		Hazardous in case of ingestion. May be fatal if swallowed.

MEDICAL CONDITION:

Aggravated by overexposure. Repeated exposure to highly toxic material may cause general deterioration of health by an accumulation in one or many human organs.

FIRST AID MEASURES:

EYE CONTACT:	Check for and remove any contact lenses, flush under running water, seek medical attention, do not use eye ointment.
SKIN CONTACT:	Thoroughly wash with non-abrasive soap under running water. Cover irritated skin with emollient.
INHALATION:	Seek medical attention. Remove to well-ventilated area. Loosen tight clothing. If breathing is difficult administer oxygen. If needed perform resuscitation. Seek medical attention.
INGESTION: OVEREXPOSURE	DO NOT induce vomiting. Seek medical attention immediately.
SIGNS / SYMPTOMS:	CNS depression, headaches, dizziness, nausea, vomiting.

FIRE FIGHTING MEASURES:

FLAMMABILITY:

Highly flammable.

FLASH POINT:

< 10 deg C.

FIRE/EXPLOSION HAZARDS IN PRESENCE OF OTHER MATERIALS:

Dry Powder, CO2. foam or water fog.

PROTECTIVE CLOTHING:

Wear MSHA/NIOSH approved self- contained breathing apparatus and full protective gear.

ACCIDENTAL RELEASE MEASURES:

SPILL: Absorb with inert material and follow appropriate waste disposal regulation. Keep away from heat and sources of ignition. Check TLV levels.

HANDLING AND STORAGE:

Keep locked up in fire- proof store. Store below 20 deg. C. Fit extractor fan to remove any fumes before entering store. Ground all equipment when decanting. Keep containers closed.

EXPOSURE CONTROL:

PERSONAL GEAR: Wear splash goggles, full cotton overalls, vapor and dust respirator (MSHA/NIOSH APPROVED) and solvent resistant gloves.

PHYSICAL AND CHEMICAL PROPERTIES:

See product technical data sheet.

TOXILOGICAL INFORMATION:

Extremely hazardous in case of inhalation. Hazardous in case of skin/eye contact and ingestion. (Irritant).

CARCINOGENIC EFFECTS:

Contains 40% by volume of C5-C7 n- Paraffin’s classified A2 by ACGIH.

ACUTE TOXICOLOGY:

ORAL: LD50:>7g/kg. (Rat)

DERMAL: LD50:>2g.kg. (Rabbit)

CHRONIC EFFECTS ON HUMANS: This substance is toxic to lungs, liver, skin and the nervous system.

THE ABOVE DATA IS RELATED TO THE PRODUCT WHILE IN A DISSOLVED STATE, ONCE THE SOLVENT HAS EVAPORATED THE RESULTING FILM IS NON-HAZARDOUS AND NON-TOXIC.

Disclaimer: The information contained in this Data sheet is to the best of our knowledge true and accurate, however neither the abovenamed supplier nor any of its subsidiaries assume any liability whatsoever for accuracy or completeness of the information contained herein, and any recommendations or suggestions made are without guarantee since the conditions of use are beyond our control. Furthermore the information contained herein shall not be construed as a license to operate under, or a recommendation to infringe, any existing patients, nor should it be confused with any Government or International safety codes.