|PACK SIZES AVAILABLE||GLUEDEVIL PRODUCT DESCRIPTION CODE|
|0.8x12mm x1m Blister – 12 Per Box||50-TAPE6326|
|0.8mmx18mmx1m Blister – 12 Per Box||50-TAPE6320|
GLUEDEVIL BU-TACK 1 is a preformed high performance polyisobutylene (PIB) based sealing tape available in single strand or multi-lane rolls. This product has a multitude of applications where joints need to be formed to seal against air and water ingress. The product is cost effective, non-toxic and requires no tools to apply.
Bu-Tack 1 should be applied to surfaces at a temperature range of between +4ºC and +40ºC. For best performance the surfaces should be clean, dry, and grease free. The product should be unwound and lightly pressed into position leaving the release paper in place. On forming the joint the release paper is removed and the closing surface pushed firmly in place, pressure applied along the length of the joint and mechanically fixed.
ROOFING & CLADDING industry where it creates an excellent seal in situations such as side and end lap joints and the bead section is particularly recommended for large corrugated end lap sheet profiles. A copy of the independent test report to the National Federation of Roofing Contractors (NFRC) specification is available on the STP website.
HEATING & VENTILATION market has found this product to be preferable to other methods of sealing flanges on ducting due to its ease of use and solvent free formulation.
AUTOMOTIVE uses include sealing around the frames of sun roofs.
CARAVAN manufacturers have many applications such as sealing between mouldings and the outer skin, lap joints on the body work and other areas where fittings are attached piercing the outer skin.
FIRE PROTECTION is enhanced by use of an intumescent version Bu-Tack 1 FR.
|COLOURS||STANDARD COLOURS ARE BLACK, WHITE, AND GREY.
MANY OTHER COLOURS AVAILABLE SUBJECT TO QUANTITY.
|DIMENSIONS||1mm to 35mm THICK, 5mm to 150mm wide. ROLL LENGTH IS DEPENDANT ON THICKNESS.|
|SHELF LIFE||24 MONTHS IN AMBIENT CONDITIONS.|
|LIFE EXPECTANCY||IN EXCESS OF 25 YEARS.|
|SERVICE TEMPERATURE RANGE||-40 TO +90ºC.|
|JOINT MOVEMENT||UP TO 15%|
|COMPATIBILITY||VERY GOOD ADHESION TO MOST
SURFACES & COMPATIBLE WITH MOST
COMMONLY USED CONSTRUCTION MATERIALS.
FOR FURTHER INFORMATION, PLEASE
CONTACT OUR TECHNICAL DEPARTMENT.
|DYNAMIC TENSILE TENSION:
SEPARATION RATE 100mm/min @ 20ºC
|24 N/cm2 TO STANDARD 180 GRIT
SEPARATION RATE 200mm/min @ 20ºC
|22 N/cm2 TO STANDARD 180 GRIT
|MOISTURE VAPOUR TRANSMISSION
RATE : INDEPENDENTLY TESTED TO BS 15106-3
|0.025 g/m2/24hr/mm at 25ºC & 75% RH|
*HIGH PUMPING RESISTANCE
1mm to 35mm THICK, 5mm to 150mm wide. ROLL LENGTH IS DEPENDANT ON THICKNESS.
STANDARD COLOURS ARE BLACK, WHITE, AND GREY.
ANY OTHER COLOURS AVAILABLE SUBJECT TO QUANTITY.
Store the product in a cool and dry place.
24 months in ambient conditions.
Keep out of reach of children.
Avoid contact with eyes and skin.
For more information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing, physical, ecological, and toxicological and other safety related data.